Hardware reference guide

CableFast Cabling
794
35013379 11/2011
140CFJ00400 Quantum CableFast Cabling Block
Overview
The J block is used for analog outputs, with individual fusing provided per channel.
This interface provides plus, minus, shield, and power supply interfaces for both field
and loop power configurations.
See Common Features of the CableFast Cabling System (see page 754) for
information on common specifications and features of CableFast cabling blocks.
Terminal Block
The following figure shows the 140CFJ00400 terminal block.
Application Notes
The following are the application notes for the 140CFJ00400 module.
1. Configuration – Four analog outputs with a common loop supply. Each point is
allocated six terminals.
2. Compatibility – This terminal block provides four individually 0.063 A fused
connection point sets for the 140ACO02000 analog output module.