Hardware reference guide

Power Supplies
35013379 11/2011 77
LED Indicator and Description
The following figure shows the CPS11400 LED indicator.
The following table shows the CPS11400 LED description.
Input Voltage Total Harmonic
Distortion
Less than 10% of the fundamental ms value
Input Current 1.1 A @ 115 Vac. 0.6 A @ 230 Vac
Inrush Current 38 A @ 115 Vac. 19 A @ 230 Vac
VA Rating 130 VA
Input Power Interruption 1/2 cycle @ full load and minimum-rated line voltage /
frequency. No less than 1 second between interruptions.
Fusing (external) 2.0 A slo-blo recommended (Part # 57-0089-000 or
equivalent)
Output to Bus
Voltage 5.1 Vdc
Maximum Current 8 A @ 60° C (See the operating curve below)
Minimum Current None required
Protection Over Current, Over Voltage
General
Field Wiring Connector
(included)
7 point terminal strip (Part # 043506326)
Internal Power Dissipation 6.0 + 1.5 x I
out
= Watts (where I
out
is in Amperes)
Operating Mode Standalone
Specifications
LED Description
LEDs Color Indication when On
Pwr ok Green Power is supplied to the bus.