Hardware reference guide

Power Supplies

35013379 11/2011

LED Indicator and Description

The following figure shows the CPS11100 (PV01 or greater) LED indicator.

NOTE: For "closed system" installations, connector 140XTS00 500 must be used

(refer to Closed System Installation, page 750 ).

Input Current 0.4 A @ 115 Vac. 0.2 A @ 230 Vac

Inrush Current 10 A @ 115 Vac. 20 A @ 230 Vac

VA Rating 50 VA

Input Power Interruption 1/2 cycle @ full load and minimum rated line voltage /

frequency. No less than 1 second between interruptions.

Fusing (external) 1.5 A slo-blo recommended (Part # 043502515 or

equivalent)

Output to Bus

Voltage 5.1 Vdc

Maximum Current 3 A

Minimum Current 0.3 A

Protection Over Current, Over Voltage

General

Field Wiring Connector

(included)

7 point terminal strip (Part # 043506326)

Internal Power Dissipation 2.0 + 3.0 x I

OUT

= Watts (where I

OUT

is in Amperes)

Operating Mode Standalone

Specifications