Hardware reference guide

Hardware Installation
720
35013379 11/2011
Hardware Installation – Mounting Quantum Modules
Overview
Quantum modules, with the exception of power supply modules, can be inserted into
any slot of any backplane, and, with the added exception of CPU modules, can be
removed under power (hot swapped) without damaging modules or the backplane;
power supply modules must be installed in the first or last slots of the backplane.
Refer to the following figures and procedure when mounting modules.
CAUTION
Possible danger to personnel or equipment.
An I/O module can only be hot swapped with the field side terminal strip removed.
Failure to follow these instructions can result in injury or equipment damage.