Hardware reference guide

I/O Modules
35013379 11/2011 689
Common Specifications
The following table shows the common specifications for the DDM69000 module.
Version Levels
The following table shows the required version levels. Modules marked with
SV/PV/RL rather than V0X.X0 exceed the minimum version levels in this table
Common Specifications
Module Protection
Input Protection Resistor limited
Output Protection Transient voltage suppression (internal)
Isolation (Input and Output)
Input Group-to-Output 1780 Vac rms for 1 minute
Output-to-Output
Group to Bus 2500 Vac rms for 1 minute
Fault Detection
Input None
Output Over current - each point
Bus Current Required (Module) 350 mA
Power Dissipation 0.4 W x (1.0) x number of input points ON + (0.75) x total
module output current
External Power (Module) Not required for this module
Fusing
Input Internal - None
External - User discretion
Output Each output is protected by an electronic shutdown:
For current output surges between 4 A and 30 A, the
outpoint point will shutdown after 0.5 s.
For current surges greater than 30 A, the output will
shutdown immediately.
Products Minimum Version Level (see
lable illustration)
User Action Required
CPUs and NOMs < V02.20 Executive upgrade to ≥ V02.10
≥ V02.20 None
RIOs < V02.00 Module upgrade
≥ V02.00 and < V02.20 Executive upgrade to ≥ V01.10
≥ V02.20 None