Hardware reference guide

I/O Modules
35013379 11/2011 675
NOTE: Input signals must be sinusoidal with less than 6% THD and 63 Hz maximum
frequency.
Output Specifications
The following table shows the Output specifications.
Response (Inputs)
OFF - ON Min 4.9 ms/max 0.75 line cycle
ON - OFF Min 7.3 ms/max 12.3 ms
Output Specifications
Absolute Maximum Output Voltages
Continuous 85 ... 132 Vac
10 seconds 156 Vac
1 cycle 200 Vac
On State Drop / Point 1.5 Vac
Minimum Load Current (rms) 5 mA
Maximum Load Current (rms)
Each Point* 4 A continuous
Each Group 4 A continuous
Per Module* 8 A continuous (see the derating chart below)
Off State Leakage / Point (max) 2 mA @ 115 Vac
Surge Current Maximum (rms)
One Cycle
Two Cycles
Three Cycles
Per Point
Per Group
30 A 45 A
20 A 30 A
10 A 25 A
Response
OFF - ON, ON - OFF 0.50 of one line cycle max
Applied DV / DT 400 V/μs
Output Protection RC snubber suppression (internal)