Hardware reference guide

I/O Modules
674
35013379 11/2011
140DAM59000 Quantum I/O AC Input 115 Vac 2x8 / AC Output 115 Vac 2x4)
Overview
The AC Input 115 Vac 2x8 / AC Output 115 Vac 2x4 module accepts 115 Vac inputs
and switches 115 Vac loads.
Topology Specifications
The following table shows the specifications for the 115 VAC and AC IN/OUT
module for the Topology.
Input Specifications
The following table shows the Input specifications.
Topology
Number of Input Points 16 in two 8 point groups
Number of Output Points 8 in two 4 point groups
LEDs Active
F (red) - No power applied to the group(s) or blown fuse
1 ... 16 (Green - right two columns) - Indicates input status
1 ... 8 (Green - left column) - Indicates output status
Required Addressing 1 word in
0.5 words out
Input Specifications
Operating Voltages and Input (Wetting) Currents*
50 Hz
Typical Input Impedance
ON: 85 ... 132 Vac (11.1 mA max)
OFF: 0 ... 20 Vac
14.4 kΩ capacitive
60 Hz
Typical Input Impedance
ON: 79 ... 132 Vac (13.2 mA max)
OFF: 0 ... 20 Vac
12 kΩ capacitive
*Do not use outside the 47 ... 63 Hz range.
Maximum Allowable Leakage Current from an
External Device to be Recognized as an OFF
Condition
2.1 mA
Absolute Maximum Input Voltages
Continuous 132 Vac
10 s 156 Vac
1 cycle 200 Vac