Hardware reference guide

I/O Modules
588
35013379 11/2011
I/O Map Register Assignment
The output modules listed above can be configured as either 32 contiguous 0x
references, or as two 4x registers in the following format.
The following figures show the formats for the output modules.
I/O Map Status Byte
The I/O map status byte (not including 140DAO85300 module) is used by the
modules as follows:
Module Zoom Selections
Push <Enter> to display and select the output type and the timeout state for the
module. Timeout state is assumed when system control of the module is stopped.
The following figure shows the output type and timeout state.
96-Point Output Module
The 96 point output module is:
z 140DDO36400 - DC out 24VDC 6x16 Source