Hardware reference guide

I/O Modules
35013379 11/2011 585
Module Zoom Selections (Outputs)
Push <Enter> to display and select the output type and the timeout state for the
module. Timeout state is assumed when sytem control of the module is stopped.
12-Point Output Module
The 12-point output module is:
z 140DDO88500
I/O Map Register Assignment (Fault Inputs)
The 140DDO88500 can be configured as either 16 contiguous 1x references or as
one 3x register.
The following figure shows the inputs configuration.
Module Zoom Selections (Inputs)
Push <Enter> to display and select the input type. This selection appears if the
module is I/O mapped to a 3x register. The following figure shows the input type.
NOTE: Do not use the BCD selection, as it will incorrectly display fault conditions.
I/O Map Register Assignment (Outputs)
The 140DDO88500 can be configured as one output (4x) register in the following
format. The following figure shows the register format for outputs.