Hardware reference guide

I/O Modules
580
35013379 11/2011
140DDI85300 Quantum I/O DC Input 10 ... 60 Vdc 4x8 Sink Module
Overview
The DC Input 10 ... 60 Vdc 4x8 Sink module accepts 10 ... 60 Vdc inputs and is for
use with shared input common wired to positive potential. ON-OFF levels are
dependent on the reference voltage selected. Different reference voltages may be
used for different groups.
Specifications
The following table shows the specifications for the 10-60 VDC IN module.
Specifications
Number of Input Points 32 in four 8 point groups
LEDs Active
1 ... 32 (Green) - Indicates point status
Required Addressing 2 Words In
Group Supply / Tolerance ON State *
OFF State *
12 Vdc / +/- 5% 9 ... 12 0 ... 1.8 IEC 57 Class 2
24 Vdc / -15% ... +20% 11 ... 24 0 ... 5 IEC 65A Type 2
48 Vdc / -15% ... +20% 34 ... 48 0 ... 10 IEC 65A Type 1
60 Vdc / -15% ... +20% 45 ... 60 0 ... 12.5 IEC 57 Class1
*ON/OFF state ranges are specified at nominal
reference voltages.
Absolute Maximum Input 75 Vdc
ON State Current (mA)
@ 12 Vdc 5 ... 10 mA
@ 24 Vdc 6 ... 30 mA
@ 48 Vdc 2 ... 15 mA
@ 60 Vdc 1 ... 5 mA
Response
OFF - ON 4 ms
ON - OFF 4 ms
Switching Frequency <100 Hz max
Input Protection Resistor limited
Isolation
Group to Group 700 VDC for 1 minute
Group to Bus 2500 VDC for 1 minute