Hardware reference guide

I/O Modules
35013379 11/2011 535
32-Point Input Modules
The 32-point input modules are as follows:
z 140DAI35300 (AC Input 24 Vac 4x8)
z 140DAI45300 (AC Input 48 Vac 4x8)
z 140DAI55300 (AC Input 115 Vac 4x8)
z 140DAI75300 (AC Input 230 Vac 4x8)
z 140DDI15310 (DC Input 5 V 4x8 Source)
z 140DDI35300 (DC Input 24 Vdc 4x8 Sink)
z 140DDI35310 (DC Input 24 Vdc 4x8 Source)
z 140DDI85300 (DC Input 10 ... 60 Vdc 4x8 Sink)
I/O Map Register Assignment
The input modules listed above can be configured as either 32 contiguous discrete
input (1x) references or as two contiguous input (3x) registers in the following format.
The following figure shows the input points for Register 1 and Register 2.
I/O Map Status Byte
There is no I/O map status byte associated with these modules.
Modsoft Module Zoom Selections
Push <Enter> to display and select the input type. This selection appears if the
module is I/O mapped to a 3x register. The following figure shows the input type.