Hardware reference guide

I/O Modules
478
35013379 11/2011
The following shows the word 9 register.
* A range warning is issued when a channel input exceeds the rated input value, as
shown in the following table. An out-of-range bit is set when a channel input exceeds
the rated input value by 2.4% or when a broken wire is sensed on the channel. The
warning bit is cleared when the out-of-range bit is set.
The following figure shows the word 10 register.
I/O Map Status Byte
The I/O map status byte is used by the 140ATI03000 Input Module as follows.