Hardware reference guide

Intelligent/Special Purpose
384
35013379 11/2011
140CHS11000 Hot Standby Module
Overview
This section describes the Hot Standby Module 140CHS11000. The Quantum Hot
Standby system is designed for use with remote I/O networks when downtime
cannot be tolerated.
Related Documentation
For more detailed information on the use of the Hot Standby module, refer to the
Quantum Automation Hot Standby System Planning and Installation Guide, part
number 840USE10600.
Hot Standby Module
The following figure shows the Hot Standby Module components.
Specifications
The following table shows the specifications for the Quantum Hot Standby system.
Specifications
I/O Type Quantum
Fiber Optic Communication Ports 2 (Transmit and Receive)
Compatibility
Programming Software Modsoft V2.32 or Concept 2.0 at a minimum
Quantum Controllers All, V2.0 at a minimum. (Check the version label
of the top front of the module for the proper
revision level.)
Bus Current Required (Typical) 700 mA