Hardware reference guide

Intelligent/Special Purpose
348
35013379 11/2011
Fuse Location
The following figure shows the fuse location.
NOTE: Turn off power to the module and remove the field wiring terminal strip to
gain access to the fuse.
Miscellaneous
Isolation (Channel to Bus) 1780 Vac rms for 1 minute
Fault Detection Blown fuse detect, loss of outputs 1A, 1B, 2A, 2B field
power
Power Dissipation 4.0 W + 0.4 x total module load current
Bus Current Required 650 mA
External 24 Vdc Power Supply 19.2 ... 30 Vdc, 24 Vdc nominal, 50 mA required, plus
the load current for each output
Fusing Internal: 2.5 A fuse, (Part # 043503948 or equivalent)
External: User discretion
Compatibility Programming Software: Modsoft V2.32 or Concept
2.0 at a minimum
Quantum Controllers: All, V2.0 at a minimum
Specifications