Hardware reference guide

Ethernet Modules
35013379 11/2011 293
LED Indicators and Descriptions
The following figure shows the NOE2X100 LED indicators.
The following table describes the meaning of each NOE2X100 LED indicator.
Installing the NOE Module
Quantum Ethernet TCP/IP modules come fully configured. However, before
installing your module, you should make sure the default configuration is appropriate
for your network.
If the module will be communicating on an open network, consult your network
administrator to obtain a unique IP network address. You must enter this address in
the Modsoft Ethernet TCP/IP configuration extension screen before installing the
module.
LED Descriptions
LEDs Color Indication when On
Active Green Module is communicating with backplane.
Ready Green Module has passed internal diagnostic tests.
Run Green Flashes during normal operation.
Link Green Ethernet link to hub is ok.
Kernel Amber If steady, module is operating in kernel mode. If flashing, module is
waiting for download.
Fault Red An error has been detected, a download has failed or a reset is in
process.
Coll Red If steady, cable is not connected. If flashing, Ethernet collisions are
occurring.
Appl Amber Entry exists in crash log.