Hardware reference guide

Modbus Plus NOMs
264
35013379 11/2011
4EH bad code selected for mstrout_sel proc
52H config table exec_id is different than the sys table exec_id
53H got a pupinit hook for neither S985 nor S975 addr
56H did not get bus ack form 984 interface within 400 ms
59H unexpected modbus port state in send command to 680
proc
5AH system table missing
5BH bad DPM critical byte write
4 616h bad or unexpected interrupt
617h loopback error on modbus port 1
618h parity error
619h set port greater than 21
61AH controller ram size is less than 8k
621H modbus cmd-buffer overflow
622H modbus cmd-length is zero
623H modbus abort command error
624H bad modbus state trn-int
625H bad modbus state rcv-int
626H bad comm state trn_asc
627H transmit underflow error
628H bad comm state trn_tru
629H bad comm state rcv_asc
62aH bad comm state rcv_rtu
62bH bad transmit comm state
62cH bad receive comm state
62dH bad modbus state tmr0_evt
62eH bad uart interrupt
631H UPI timeout error
632H bad UPI response opcode
633H UPI bus diagnostic error
634H mbp bus interference error
635H bad mbp response opcode
636H timeout waiting for mbp
637H mbp out of synchronization
638H mbp invalid path
639H peer did not respond with complement of the opcode
LED Error Codes
Number of Blinks Code Error