Hardware reference guide

Networking
258
35013379 11/2011
Connectors
The following table shows the connector types
NOTE: All connectors must have a short boot for strain relief.
Termination Kits
The following table shows the termination kits.
Light Sources, Power Meters
For Photodyne light sources and power meter products, contact 3M Telecom
Systems Division.
Connector Type Part Number Operating Temperature
ST Bayonet (Epoxy) 3M 6105 –40...+80 °C (–40...+176 ° F)
ST Bayonet (Hot Melt) 3M 6100 –40...+80 °C (–40...+176 ° F)
ST Bayonet (Epoxy) AMP 501380 Series –30...+70 ° C (–22...+158 ° F)
ST Cleave and Crimp AMP 504034 Series –40...+65 ° C (–40...+149 ° F)
Mechanical Line Splice (one
size fits all)
3M 2529 Fiberlok™ II –40...+80 ° C (–40...+176 ° F)
Kit Type Part Number Description
Bayonet or Push-Pull ST (Hot
Melt)
3M 6355 110 Vac, only for 3M connectors
Bayonet ST (Epoxy) AMP 501258-7 110 Vac, only for AMP connectors
Bayonet ST (Epoxy) AMP 501258-8 220 Vac, only for AMP connectors
Mechanical Line Splice 3M 2530 Fiber Splice Prep Kit, complete with
cleaving tool