Installation Guide

Have a question?... Need a part ASAP?...1-800-589-7990

You can now attach your keys to the

Key Tags and arrange them according

to your needs inside the secure locking

compartment.

Finding unknown Combinations:

• Open the lock by using the Master Over-Ride Key.

• Remove the lock from the door by unscrewing the small

nut on the back side of the lock and removing the

Hooked Cam. Then remove the large nut holding the lock

to the door.

• With the lock removed from the box, insert the code pin

into one of the four holes on the back side of the lock

behind the Numbered Dials.

• Turn the dial associated with that inserted pin until it

stops.

• Repeat this step with the remaining three holes.

• When finished the numbers on the Dials will show your

combination, please write this combination down and

keep it safe yet accessible.

If your Key Boss came with the optional combination lock,

refer below for instructions on how to use:

Set Your Own Combination: The combination can be changed in seconds

without special tools or disassembly.

• Set Numbered Dials to opening combination (factory default all 0’s)

• Depress Reset Button and hold down while changing Numbered Dials

to desired combination.

• Release the Reset Button and the new combination is set.

5/6

20-Dec-2019

OPTIONAL COMBINATION LOCK

Reset Button

Open Locked

Hooked

Cam

Over-Ride

Key Hole

Over-Ride Key

Code Pin