Specifications

APPENDIX C: EVENT PROGRAMMING
Page 187 MRC-565 Packet Data Radio Operations & Maintenance
The User will create the event table with the following commands:
Event Programming Command Summary
There can be from 1 to 400 events defined in the event table including reset and scanned events.
The following list shows all the command formats. Commands tagged "Yes" in the "Event"
column each consume one entry in the event table. Some of the commands, tagged with "No",
are used to free up event table entries or control the operation of the event monitor.
There is also a group table, and a text table. The group table an array of 16 groups by 16 sensors.
Each entry in the group table consists of a sensor type – discrete or analog – and a discrete bit
identification or analog channel number. Commands tagged "Yes" in the "Group" column each
consume one entry in the group table. Some of the commands with "Yes" are used to free up
group table entries. The text table is used to store up to 40 text messages or operator commands
of up to 40 characters each.
There are 8 accumulators, 8 timers and 8 counters that can be used to facilitate the creation of
complex logic.
Table Entry?
Command
Event
Group
EVENT
No
No
EVENT, DEL, event number
No
No
EVENT, DEL, ALL
No
No
EVENT, START
No
No
EVENT, STOP
No
No
EVENT, RESET, action
Yes
No
EVENT, DIOHI, bit-name, settle, holdoff, action
Yes
No
EVENT, DIOLOW, bit-name, settle, holdoff, action
Yes
No
EVENT, ADCHI, chan-name, hi-level, settle, holdoff, action
Yes
No
EVENT, ADCLOW, chan-name, low-level, settle, holdoff, action
Yes
No
EVENT, IFGT, bit-name, bit-name, action
Yes
No
EVENT, IFLT, bit-name, bit-name, action
Yes
No
EVENT, IFEQ, bit-name, bit-name, action
Yes
No
EVENT, CONT, action
Yes
No
EVENT, DO, action
Yes
No
EVENT,STOP
EVENT,DEL,ALL
EVENT,RESET,SET,CTS
EVENT,RESET,SET,BIT
2
EVENT,DIOHI,DTR,16,
160,MARK
EVENT,START
SAVE