Specifications

APPENDIX A: COMMANDS
Page 143 MRC-565 Packet Data Radio Operations & Maintenance
MRC-565 COMMANDS
TABLE
COMMAND
DESCRIPTION
PARAMETERS
RANGE
Remote = 256 – 4095
sss = msg serial
number
1 – 245
DSP
SHOWS DSP IMAGES STORED IN FLASH
DSP,WATCHDOG,ON OR
OFF
SETS WD TIMER TO RESET DSP IF NO RX
WITHING 5 MINUTES
ON OFF
*DUTY CYCLE
{,percent,{max burst length in
bytes}}
Set/display transmitter duty cycle (default is 10%).
Duty cycle increases in increments of 5%.
percent = 1 – 100
1 – 100
EVENT
Show Event Table.
EVENT,DEL,ALL
Delete Event Table.
EVENT,DEL,n
Delete Event Number 'n'.
EVENT,RESET,ACTION
Define an action to be taken at power-up/reset.
EVENT,{DIOHI,DIOLOW,DI
OFLASH},BIT,DURATION,H
OLDOFF,ACTION
Define an event that looks for a discrete input line to
go to a high/low level.
DIOHI = Scan discrete
input signal for high
condition.
DIOLOW= Scan
discrete input signal for
low condition.
Bit-name= Name of
discrete input signal to
be scanned for high
level. (single or
multiple inputs)
Duration= Number of
clock ticks for the input
signal to settle at the
high level before
clearing an event
Holdoff= Number of