Manual

Page 4
Cone Adapter Valve
Valve O
p
en Valve Closed
AFTER EVERY PROCEDURE
TURN ALL VALVES TO HOME
HOME
FILL NEW TANK
EMPTY NEW TANK
EMPTY WASTE TANK
EMPTY WASTE TANK
(PRESSURE)
TOP OFF
EMPTY NEW TANK
EMPTY RADIATOR
(VACUUM)
EMPTY RADIATOR
FILL NEW TANK
TOP OFF
EMPTY NEW TANK
FILL RADIATOR
FILL NEW TANK
HOME
TOP OFF
VACUUM GAUGE
HOME
ON
HOME
HOME
ON
HOME
ON
NEW 2
NEW 1
NEW 3
SELECT NEW COOLANT SOURCE
TURN ONE VALVE ON TO
VCX
-
4
Home Position
The above valve configuration is set before the VCX is connected to the shop air supply. This is
also the position that the valves are returned to after each procedure. To select a procedure turn
all of the valves to the colored triangle that corresponds with the desired procedure. While
performing certain functions the appropriate NEW tank valve must be set to the ON position.
This illustration demonstrates the open and closed
position on the Cone Adapter Valve. The closed
position is 90 degrees clockwise from center.