Instruction Manual

Page 12
WEIGHT= XX.X LB
AUTOMATIC
?
5
>>>>> ENTER
WEIGHT= XX.X LB
SETUP
?
5
ENTER
FILTER HOURS=
XX.X HOURS
>
TOTAL RECYCLED=
XXXX.X KG
>
TOTAL CHARGED=
XXXX.X KG
>
Accessing Stored Data
1. Setup the RHS780 as shown on Page 4 and then turn the Main Power Switch
ON.
2. Using the Keypad, press the “Up Arrow” key five times to display “WEIGHT=
XX.X LB” “SETUP?
5” and then press the ENTER key. The Display will read
“FILTER HOURS=” “XX.X HOURS”.
See the Filter Maintenance section of the manual, Page 14, for the procedure
to change the filters. The normal Filter Change Interval is after every 25
hours.
Note: Press and hold the “Right Arrow” key and press the RESET key to
remove the “CHANGE FILTERS
5” message.
3. Press the “Up Arrow” key. The Display will read “TOTAL RECYCLED=”
“XXXX.X KG”.
4. Press the “Up Arrow” key. The Display will read “TOTAL CHARGED=”
“XXXX.X KG”.
5. Press the “Up Arrow” key to return to the Main Menu.