Manual

Two Modes of Operation
The RHS730E can be used to perform semi-automatic
procedures or run in a fully automatic mode.
The following Table of Contents will direct you to the
proper sections for detailed operating instructions.
TABLE OF CONTENTS - RHS730E
Before Using the RHS730E ..................... 2
Safety Precautions............................ 2
How the RHS730E Operates .................... 3
Setup ...................................... 4
Semi-Automatic Procedures
Fill Charge Cylinder ........................... 5
Recycle .................................... 6
Drain Recovered Oil........................... 7
Manual Air Purge ............................. 7
Deep Vacuum ............................... 8
Charge ..................................... 9
Fully Automatic Procedure
Automatic ...................................10
Programming & Maintenance
Access Stored Data ...........................13
Set Over Charge Amount .......................14
Calibrate Weight Scale.........................15
Scheduled Maintenance ........................ 16
Filter Maintenance ............................ 16
Change Filters ...............................16
Parts Identification ............................ 17
Solenoid, Pressure Switch & Contactor Identification . 19
Technical Support 800-468-2321