User guide

IMPORTANT: Test drive vehicle after service to verify
proper brake system performance.
Page 10
Troubleshooting & Maintenance
The BFX-1 has six filters to prevent any debris from entering internal components and possibly
causing problems. The location of the filters is illustrated below.
New Fluid Filter: Filters fluid from the new fluid tank. If the fluid flow seems slow while trying
to fill the master - check and clean this filter.
The filter is inside the control box on top of the machine. Remove screws
and gently raise the control box to access the filter. Unscrew the cover
and clean the screen as required.
Vacuum Filter: Filters fluid in the five vacuum hoses which attach to the bleeder valves
and clean out the master cylinder. A filter is mounted in-line on each of the
vacuum hoses. If the fluid flow seems slow from the bleeders - check and
clean these filters.
These filters can be accessed through the door on the side of the BFX-1.
Remove hoses from both ends of the filter and try clearing the filter with
compressed air. Replacement filters (P/N 026-80372-00 for the 4 bleeder
line and a 026-80325-00 for the master cylinder line) can be ordered from
RTI.
New Fluid Filter
5 Vacuum Filters
Top View
Rear Vie
w