User manual

MAGUS 16 SERIES DVR USER MANUAL
Page 24 of 20
Esee net operational description
1.DVR connect with network and insure it is running.
2.Setup the UPNP function from Router: this Router is TP-LINK, just find the UPNP out and setup.
1. Turn into DVR: click right button of mouse-setup-system setup-network setup,as below:
IP Address：Default for：192.168.1.114（fill out according to your actual situation:1 segment:
192.168.1.114，0 segment: 192.168.0.114，If IP without conflict, no need to change.)
Subnet Mask：default for 55.255.255.0
Gateway：default for 192.168.1.1（can be change according to the actual situation）routers running
status can check from segment.
DNS Address：192.168.1.1, change into user's network DNS. (can check the DNS address from router)
After full fill all the information and save, exit to menu then turn into above menu again. Esee ID will
appear.
4、visit IE browser and input:
www.e-seenet.com
First setup enable the active-X as picture: