User manual

MAGUS 16 SERIES DVR USER MANUAL
Page 13 of 20
3.8.3.3Recode setup
In the "system setup" menu, click "Record Setup "
Channel ：chose the right CH as needed by clicking the inverted triangle
Weekday : chose the right day as user's need, "ALL" means all days in a week.
Image mode and time ： every time slot can set different recoding mode in all 4 time slot. "Time "
recording with red color , "Motion" recording with green color , "Sensor"recording with
yellow color ; “☑" means working , “□” means invalid. The bottom parts has times status
display, whole schedule from time 0~24 hours
Copy to ： select the target channel on the right of "copy to "button ,click "copy to" & ''ok " then system
will set the current channel setup informations to other target video channel. Click button
"cancel", the setup informations is non-saved but to exit.
3.8.3.4Network setup
In the "system setup" menu, click " Network Setup "
MAC address：showing the device's MAC address
DHCP：select whether to start up DHCP to automatically obtain IP 。“☑”means works ；“□” means non-work
IP address ：the IP address must be unique and can not be in conflict with the host or workstation on
the same network segment
Subnet Mask ：subnet for the network segment。