User manual

MAGUS 16 SERIES DVR USER MANUAL
Page 12 of 20
3.8.3.2 Encode setup
In the "system setup" menu, click "Encode setup "
Channel ：chose the right CH you like by clicking the select box
Stream： chose the right stream : "main stream" or "sub stream "
Encode mode：chose the right encode model you need : "video only "means only encoding for video ;
"AV combined" means encoding for both video and audio.
Bitrate mode ：chose the right bitrate mode you need : "constant bitrate " means system encoding
video as user-defined bitrate and and frame rate. "variable bitrate" means system encoding
according to user-defined image quality and video frame rate , but bit rate is automatically
adjusted by the system depending on the video sceen. "average birtrate " means system
automatically adjusted fluctuation as user- defined bitrate.
Encode format： encoding resolutions defined by user' need : （QCIF）176*144、 （CIF）352*288
(HD1)576*288 （D1）704*576
Bitrate： users select the encoding bitrate as needed. The higher bitrate ,the better image but with large disk
space
Fluctuation： image quality fluctuations , user identified.
Frame rate ：users select the video frame rate as needed. The higher frame rate ,the better image but with
large disk space
Copy to ： select the target channel on the right of "copy to "button ,click "copy to" & ''ok " then system
will set the current channel setup information to other target video channel. Click button
"cancel", the setup information is non-saved but to exit.