Data Card (16) Series DVR USER MANUAL
MAGUS 16 SERIES DVR USER MANUAL Contents Chapter One Product Description .................................................................................................... 3 1.1 General ............................................................................................................................... 3 1.2 Technical Parameters ......................................................................................................... 3 Chapter Two Structure Appearance Description ...............
MAGUS 16 SERIES DVR USER MANUAL Chapter one Product Description 1.1 General This equipment is designed specifically for the field of a number of digital security surveillance products, which uses an Embedded Processor Init (MPU) and operating systems, combined with the field of the latest IT technologies, such as video and audio encode/decode, high-capacity hard disk recorder, TCP / IP network technology, firmware in FLASH, making system operation more stable.
MAGUS 16 SERIES DVR USER MANUAL Chapter Two: Structure Appearance Description 2.
MAGUS 16 SERIES DVR USER MANUAL 8 channel DVR Rear Panel Description： AUDIO OUT：Audio Output Connector AUDIO IN：Audio Input Connecor VIDEO IN：Video Input Connector NET：RJ-45 Standard Network Connector VIDEO OUT：Video Output Connector RS-485：485 Pan/Tile Device Connector USB：Standard USB Connector DC12V：12V(DC) Power Connector VGA：Video Output Connector(Optional) POWER：Power key 16channel DVR Rear Panel Description： AUDIO OUT：Audio Output Connector AUDIO IN：Audio Input Connecor VIDEO IN：Vide
MAGUS 16 SERIES DVR USER MANUAL 2.3 Remote Control Description Note:Many devices in near space,remote control should select a device according to device number.So each device needs a unique device number,unless remote control may operate devices with the same number. Chapter Three: Description of Operation System 3.1 Turn on / off Confirm that AC voltage accessible matches the requirements of digital video recorder.Ensure that the digital video recorder power outlet to a good middle ground termination.
MAGUS 16 SERIES DVR USER MANUAL interface. 【Video / REC】 shortcut keys to enter manually recording interface. 【PTZ】 shortcut keys into PTZ control interface. Description: Default password is empty, click "enter" can into menu directly. 3.3.2 composition of the menu Menu component units mainly in the following categories: （1） Check box: providing two kinds of status options, "√" represent enable, "□" disable, use 【confirmation / 】 button or 【↑】, 【↓】 key or click the left mouse button to choose.
MAGUS 16 SERIES DVR USER MANUAL 3.4 Main Menu Introduction Press MENU key or the right mouse button pop-up the main menu, main menu consists of the following three components Preview mode: in the menu column, select the corresponding screen preview mode. Shortcut menu: in menu column, there are: video playback, manual recording, PTZ control, sound shortcut menu can be directly into the corresponding pages in the menu.
MAGUS 16 SERIES DVR USER MANUAL Playback: Go into video playback interface, use up-down-left-right button or mouse to set the time period, click 【 】or left of mouse go into playback interface. Cancel : back to previous menu 3.5.2 Article playback tools Select the playback file or playback by time, it will enter the video playback interface.
MAGUS 16 SERIES DVR USER MANUAL 3.7 PTZ Control Click "PTZ control" in main menu interface for access to its settings interface Main operation of PTZ control include: directional control; horizontal sweep; zoom control; adjust the focal length; adjust aperture; PTZ speed. 3.8 Menu Click "menu" in shortcut menu enter into the main menu interface, including: video inquiry, record backup, system settup, information management , information system,system logout. 3.8.
MAGUS 16 SERIES DVR USER MANUAL 3.8.3System Setup In the main menu interface, select "System Settings" to enter its sub-menu interface. Including: Miscellaneous,Encode setup,record setup,network setup,screen setup,video detection,PTZ set up,sensor setup. 3.8.3.1Miscellaneous Choose"system setup" DATE TIME：preview time show in DVR . After setting,click"refresh".Notice: Recording will stop during time change period. OK,safe.
MAGUS 16 SERIES DVR USER MANUAL 3.8.3.2 Encode setup In the "system setup" menu, click "Encode setup " Channel ：chose the right CH you like by clicking the select box Stream： chose the right stream : "main stream" or "sub stream " Encode mode：chose the right encode model you need : "video only "means only encoding for video ; "AV combined" means encoding for both video and audio.
MAGUS 16 SERIES DVR USER MANUAL 3.8.3.3Recode setup In the "system setup" menu, click "Record Setup " Channel ：chose the right CH as needed by clicking the inverted triangle Weekday : chose the right day as user's need, "ALL" means all days in a week. Image mode and time ： every time slot can set different recoding mode in all 4 time slot. "Time " recording with red color , "Motion" recording with green color , "Sensor"recording with yellow color ; “☑" means working , “□” means invalid.
MAGUS 16 SERIES DVR USER MANUAL Gateway：need to set the gateway address to achieve communication between the different network segments.
MAGUS 16 SERIES DVR USER MANUAL DDNS setting: automatic analytical function of dynamic domain name, supported Magus free DDNS In the "network setup" menu, click " DDNS " Start using ：“☑”means DDNS dynamic domain services start using ;“□”means not to start up。 Select the right network server and input user name, password and domain name edit method pls refer to 3.3.2(4)） In the "system setup" menu, click " Network Setup " 3.8.3.
MAGUS 16 SERIES DVR USER MANUAL After the page setup is completed, click '"OK " to save the changes ; click "cancel " , non-save but exit. 3.8.3.
MAGUS 16 SERIES DVR USER MANUAL Copy to ： select the target channel on the right of "copy to "button ,click "copy to" & ''ok " then system will set the current channel setup information’s to other target video channel. Click button "cancel", the setup information’s is non-saved but to exit. 3.8.3.
MAGUS 16 SERIES DVR USER MANUAL E-mail: “☑”start "e-mail" senting function, “□”shows close the function Copy to setup: choose the target channel in the right select box, click" copy to" ,the setting information will be applied to other channel. After the setting, click "OK" to exit with saving the , or click"cancle"to exit without saving. 3.8.4 management tool In main menu, choose"management tool", it includes four interface of the user management, disk control, system maintainance and factory reset. 3.8.
MAGUS 16 SERIES DVR USER MANUAL In the " management tool", click "HDD management" Overwrite: “☑” early videos will be covered when the disk is full, “□"shows not cover. Format: “☑” stands selected, “□” stands not selected, when click "format" a confirm interface will pop up, then click confirm to format, click cancle to return the main interface. 3.8.4.3 system maintenance In the " management tool", click "HDD management".
MAGUS 16 SERIES DVR USER MANUAL In the " management tool", click"factory setting" Select the terms which need factory setting, click "OK"to save and exit or click "cancle" to exit without saving. Remarks: after factory setting, all the settings will be the initial one, please use carefully. 3.9 system information In the main menu,click"system information"which include HDD information, system information and system log . 3.9.1 HDD information The listbox shows the HDD status information 3.9.
MAGUS 16 SERIES DVR USER MANUAL In the main menu, click"system logout" User logout: uesd for exit users. After logout, if you want to use the device continue, it is necessary to relogin after logout. System reboot: It will reboot after "OK".
MAGUS 16 SERIES DVR USER MANUAL Recommended list USB modem # # # # # # # # # # # # # # # # # # # # # # # # Huawei E270+ Huawei E1820 Huawei K3765 Huawei K4505 Huawei K4605 (for Vodafone) Huawei E352 (for T-Mobile) Huawei K3770 (for Vodafone) Huawei K3771 (for Vodafone) Huawei E535 Huawei E171 Huawei E353 Huawei E173Bu (Airtel E1731) Huawei E173Du (Idea E1732) ZTE MF620 ZTE MF628 ZTE MF622 ZTE MF626 ZTE MF628+ ZTE MF633 ZTE MF636 ZTE MF637 ZTE AC8710 ZTE AC2726 ZTE AC2710 # # # # # # # # # # # # # # # # #
MAGUS 16 SERIES DVR USER MANUAL Default Setting for various service provider (APN & Dial number) Sl.No. Service Provider APN 4G Mobile Data Service 1 Airtel 4G airtelgprs.com 2G & 3G Mobile Data Service 2 Airtel-3G airtelgprs.com 3 Idea Netseter-3G internet imis 4 Aircel-3G aircelgprs.
MAGUS 16 SERIES DVR USER MANUAL Esee net operational description 1.DVR connect with network and insure it is running. 2.Setup the UPNP function from Router: this Router is TP-LINK, just find the UPNP out and setup. 1. Turn into DVR: click right button of mouse-setup-system setup-network setup,as below: IP Address：Default for：192.168.1.114（fill out according to your actual situation:1 segment: 192.168.1.114，0 segment: 192.168.0.114，If IP without conflict, no need to change.) Subnet Mask：default for 55.
MAGUS 16 SERIES DVR USER MANUAL Click Tool- internet option- security-user defined safety level-enable all section related to Active x . Remark:if there is a remark showing (not safe),can ignore-then choose ok. Download and install the Active x. Before install,pls close all IE windows. 5、input Esee ID into Device ID, user name and passwords as DVR. Default user name: admin, passwords: nothing. 1.
MAGUS 16 SERIES DVR USER MANUAL Preview mode：can click multi-channel mode. to choose the mode, or double click preview window to switchover into Disclaimers This series specifically meant for mobile network video transmission application. Always check the DVR with data card at the installation location of the DVR before buying data card. Don’t go by standards, refer suggested list of hardware& services.
