Owner manual

USB Insertion Reader
2
FEATURES
Major features of the Insert Reader are as follows:
Powered through the USB – no external power supply required (current consumption of less
than one USB Unit Load)
Hardware Compatible with PC or any computer or terminal with a USB interface
Mag-Stripe reading during insertion and/or removal of card for reliable card reading
Reads encoded data that meets ANSI/ISO/AAMVA standards and other custom formats such
as ISO track 1 format on track 2 or 3
Reads up to three tracks of card data
Compatible with USB specification Revision 1.1
Compatible with HID specification Version 1.1
Can use standard Windows HID driver for communications; no third party device driver is
required
Programmable USB serial number descriptor
Programmable USB Interrupt In Endpoint polling interval
Programmable read direction. (insert, withdrawal or both)
Non-volatile memory for configuration storage
Optional 6-foot Black or Pearl White cable; the 3-track version uses standard USB mini Type
B connector
Isolated PCB isolates electronics from debris and liquids
AGC (Automatic Gain Control) in MagTek’s latest read IC - enhances read performance
with less susceptibility to RF interference
Beam-mounted Read-heads improves card tracking capabilities
Ruggedized Chassis and Bezel Material - improves temperature and impact performance
Open Chassis Design – provides superior debris clearing capability
Half-card Drop Out – allows half-size credit cards and coins to be cleared from insert
channel.
HARDWARE CONFIGURATIONS
The Configuration is as follows:
Head
Configuration
USB
Mode
Bezel Connector Cable P/N
21065140 Dual head, Tk 1,2,3 HID/KB Flat
USB Mini B,
5-pin
16051430
Dual head, Tk 1,2
HID
Extended
53048-0510
21041494 or 21041495
21065145 Head right, Tk 1,2,3 HID/KB None
USB Mini B,
5-pin
16051430
Dual head, Tk 1,2
HID
None
53048-0510
21041494 or 21041495
21065150 Dual head, Tk 1,2,3 KB Flat
USB Mini B,
5-pin
16051430
21065154 Dual head, Tk 1,2,3 HID Flat
USB Mini B,
5-pin
16051430