Specifications

Section 3. Operation
11
LED INDICATORS
Table 3-1 describes the LED indicator conditions for check and card reading operations. The
LED indicator is located below the slot where the check is first inserted for reading.
Table 3-1. LED indicators
LED INDICATOR
DESCRIPTION
OFF
Power off
SOLID GREEN
Ready to process check or card
BLINKING GREEN Ready to process check scan or card swipe
Collected data is valid and correct
BLINKING AMBER
Check is being processed
SOLID RED
Error collecting data or data is invalid
BLINKING RED
Paper Jam
*Refer to “Section 4. Troubleshooting Guide.”
CLEANING
Clean the outside of the ImageSafe Scanner with a soft, damp cloth and wipe with a dry cloth.
Caution
To avoid damaging the read head, do not touch the inside of the check or card
paths with a wet cloth.
Use the Cleaning Swab, P/N 97200078, to clean the Scan Bars as shown and described in the
next section.