Instruction Manual

2 - Introduction
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 13
Press This Button
Verify This Happens
2 To Hopper
Hopper transport moves to (or stays at) hopper 1
1 To Hopper
Hopper transport moves to (or stays at) hopper 1
Bot Cartridge Unload,
Indenter Move
Rear (black) indent cartridge moves out of embosser toward rear of
device
Bot Cartridge Load,
Indenter Move
Rear (black) indent cartridge moves back into embosser
Bot Cartridge Home,
Indenter Move
Rear (black) indent cartridge moves back into (or stays in) embosser
Bot Cart to Indent
Loc., Indenter Move
Rear (black) indent cartridge moves between letters on embosser wheel
Bot Ribbon Advance,
Indenter Move
Ribbon in rear (black) indent cartridge advances by about ¼”
Top Cartridge Unload,
Indenter Move
Only if testing EC2000 with Front Indenter installed:
Front (white) indent cartridge moves out of embosser toward rear of
device
Top Cartridge Load,
Indenter Move
Only if testing EC2000 with Front Indenter installed:
Front (white) indent cartridge moves back into embosser
Top Cartridge Home,
Indenter Move
Only if testing EC2000 with Front Indenter installed:
Front (white) indent cartridge moves back into (or stays in) embosser
Top Cart to Indent
Loc., Indenter Move
Only if testing EC2000 with Front Indenter installed:
Front (white) indent cartridge moves between letters on embosser wheel
Top Ribbon Advance,
Indenter Move
Only if testing EC2000 with Front Indenter installed:
Ribbon in front (white) indent cartridge advances by about ¼”
Roller Consume
Hopper transport’s wheels turn for a few seconds
Push To Roller
Hopper transport takes a card from current hopper
Shuttle To Printer
Hopper transport moves to image printer
Roll To Printer
Hopper transport’s wheels turn for a few seconds to feed card into image
printer. Press Printer Eject button to move card through image printer.
XY Home
XY Transport moves to rear left of device
XY Home X
XY Transport’s X carriage moves to the left
XY Home Y
XY Transport’s Y transport moves to the rear of the device
XY To Printer
XY Transport moves to image printer
XY To Printer In
XY Transport’s X carriage moves toward image printer to engage with
card
Unclamp Card
X carriage’s card clamp rotates to unclamped position
Printer Eject
Card at image printer input is ejected to image printer exit