User Manual

6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 34
Figure 6-12 - Final Closing of the Top Access Door
6) Turn the key 90 degrees counterclockwise to lock the top access door, and remove the key.
7) Pull up firmly on the top access door’s handles to make sure it is locked.
6.5.3 How to Use the Touchscreen to Unlock the Top Access Door
To open the top access door or the card access door from the front display panel, follow these steps:
1) If the EC2000 is not already displaying the Status page, press the Status button.
2) Press the Menu button to open the Main Menu page.
3) Press the Case/Door button to open the Unlatch Case/Door page. If the Case/Door button is
grayed out, the touchscreen top access door unlock feature is disabled (see section 6.5.1 About the
Top Access Door for more information).
4) Enter the required passwords when prompted.
5) To unlock the top access door, press the Unlock Top Door button. The EC2000 will click and
display a countdown timer on the touchscreen, during which the top access door will remain
unlocked. When the countdown timer reaches zero, the electronic lock will re-engage.
6) Open the door as described in section 6.5.2 How to Use the Keys to Unlock the Top Access Door.
To close the top access door after using the touchscreen unlock feature, follow the steps in section 6.5.2
How to Use the Keys to Unlock the Top Access Door, then gently press it closed until it is locked.
6.6 About Passwords and Asterisks
The EC2000 secures subsets of menu features using different passwords. The buttons for features that
require passwords are marked with an asterisk (*). The color of the asterisk indicates which password(s)
the user will be prompted for upon pressing the button. Password types, their associated asterisk colors,
and the general functions they secure are summarized in Table 6.1.
If a user enters an incorrect password three times in a row, the device will go into lockdown mode to
prevent unauthorized use. Lockdown mode must be cleared by entering the administrator password.