Specifications
Table Of Contents
- Table of Contents
- 1 Introduction
- 1.1 About DynaPro
- 1.2 Protection for All Points Within the Payment Infrastructure
- 1.3 Securing Personal Cardholder Data
- 1.4 Security and Ease of Integration by Design
- 1.5 Remote Services
- 1.6 Physical and Electronic Security
- 1.7 Liquid Crystal Display
- 1.8 10-Digit Numeric Pad
- 1.9 Function Buttons (Soft Keys)
- 1.10 Low-Power Standby Mode
- 1.11 Magnetic Card Reading
- 1.12 Chip Card Reading
- 1.13 Contactless Card Reading
- 1.14 About Major Components
- 1.15 About Terminology
- 2 Handling and Storage
- 3 Installation
- 4 Configuration
- 5 Operation
- 6 Maintenance
- 7 Developing Custom Software
6 - Maintenance
DynaPro| Secure Cryptographic Device for PIN and Data Entry | Installation and Operation Manual
Page 36 of 40 (D99875586-41)
6 Maintenance
6.1 Mechanical Maintenance
Avoid excessive use of liquid cleaning products and do not attempt to clean the card path
with any objects other than approved cleaning cards or compressed air.
Periodic cleaning of DynaPro’s exterior may be required. To clean the outside of DynaPro, wipe down
the device with a soft, damp cloth and then wipe with a dry cloth.
6.2 Updates to Firmware, Documentation, Security Guidance
In addition to the security guidance in the product manuals, MagTek may provide updates to this
document, as well as supplemental security guidance or notices regarding vulnerabilities, at
www.magtek.com. MagTek advises checking the product’s home page periodically for the most up-to-
date information.
Any firmware updates addressing product features, bugs, or security vulnerabilities are also posted to
www.magtek.com or may be sent directly to affected customers.