Specifications
Table Of Contents
- Table of Contents
- 1 Introduction
- 1.1 About DynaPro
- 1.2 Protection for All Points Within the Payment Infrastructure
- 1.3 Securing Personal Cardholder Data
- 1.4 Security and Ease of Integration by Design
- 1.5 Remote Services
- 1.6 Physical and Electronic Security
- 1.7 Liquid Crystal Display
- 1.8 10-Digit Numeric Pad
- 1.9 Function Buttons (Soft Keys)
- 1.10 Low-Power Standby Mode
- 1.11 Magnetic Card Reading
- 1.12 Chip Card Reading
- 1.13 Contactless Card Reading
- 1.14 About Major Components
- 1.15 About Terminology
- 2 Handling and Storage
- 3 Installation
- 4 Configuration
- 5 Operation
- 6 Maintenance
- 7 Developing Custom Software
4 - Configuration
DynaPro| Secure Cryptographic Device for PIN and Data Entry | Installation and Operation Manual
Page 26 of 40 (D99875586-41)
4.1 How to Configure the Display Brightness
To adjust the device’s display brightness or contrast, press Left Function Key 5 2 3 Right Function
Key (the numbers 523 correspond to the letters “LCD”) to show the Adjust LCD page. Press 1 to
decrease the brightness or 3 to increase the brightness. To exit and apply the selected brightness setting,
press the green arrow key.
Figure 4-1 - Adjusting DynaPro’s Display Brightness