Datasheet

Dynamag MagneSafe Swipe Reader
6
Note
The two mounting inserts are 3mm diameter, 0.5mm pitch, 6.4mm
deep. The length of the screws used depends on the mounting
surface thickness and the thickness of washers (if used).
Figure 2-1. Mounting Hole Dimensions for Dynamag
2. Ensure the Reader is positioned on a flat, accessible surface with at least 4 inches
clearance on either end for room to swipe a card.
If fastening tape is to be used, clean the area that the Reader will be mounted on with
isopropyl alcohol. Remove the adhesive protective cover on the fastening tape, then
position the Reader and push down firmly.
3. Mount the Reader.