user manual

141. Locate the PCV vent tube electrical connec-
tor on the harness and peel back the tape and split
loom.
142. Approximately two inches from the
connector, cut the wires.
143. Extend the wires using the color-coded wires
and crimp/shrink connectors supplied. Install the
connectors as noted before. Cover the extended
harness with the split loom supplied.
144. Connect the extended harness to the engine
vent tube connector
05/06
Page 38
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com