user manual

139. Cover the extended harness with the split
loom supplied.
138. Extend the wires using the color-coded
wires and crimp/shrink connectors supplied.
Install the connectors as noted before. Be sure
to add a additional stripe to the extention wire for
the previously marked yellow/white wire. Ensure
that all connections are correct and that the two
yellow/white wires are connected properly and not
mixed.
140. Install the TPS connector onto the throttle
body.
Added
Stripes
137. Peel the tape and split loom back from the
TPS connector. Examine the wires and notice
that there are TWO yellow with white wires. Before
cutting all the wires use a felt tip marker to ap-
ply another stripe to ONE of the exposed yellow/
white wires. Even though the two yellow/white
wire are the same color, they cannot be inter-
changed when extending the wires. Adding
the additional stripe will ensure that the connec-
tions remain correct.
05/06
Page 37
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com