user manual

115. On 2WD applications connect one end of the
11/32” hose supplied to the brake check valve.
116. On 2005-2006 4WD applications connect the
11/32” hose to the lower barb of the “T” fi tting.
“T” Fitting
11/32” Hose
11/32” Hose
Check Valve
113. Re-install the coolant hose to the water
manifold and secure it with the spring clamp.
Coolant Hose
114. Connect one end of the 10” length of 1/4”
hose supplied to one of the small barbs located
below the bypass canister on the supercharger
manifold. Connect the remaining end of the hose
to the Fuel Pressure Sensor barb located on the
fuel rail as shown. Note: Either one of the small
barbs can be used for a optional “boost gauge”
connection.
Fuel Pressure
Sensor
05/06
Page 31
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com