user manual

102. Assemble the MAF element into the new
MAF tube with the original screws. Note the
direction of the “FLOW” as shown on the MAF
element mounting fl ange, this should point
towards the small opening of the MAF tube.
103. Install the supplied air fi lter to the air box as
shown.
101. Carefully remove the Mass Air Flow (MAF)
element from the top of the air box by removing
the two screws with a T-20 Torx driver.
104. Assemble the MAF tube to the air box as
shown. Secure the air box to the MAF tube with
the supplied band clamp.
MAF Element
Air Flow
Screws
05/06
Page 28
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com