user manual

90. Re-install the thermostat and seal O-ring
into the water manifold. Torque the thermostat
fasteners to 89 in-lbs with a 10mm socket and
torque wrench.
92. Install the alternator control connector on the
alternator.
Alternator Control Con-
nector
91. Re-install the alternator bracket with the three
original bolts. Tighten the bolts and torque them to
106 in-lbs (12Nm).
89. Install the idler pulley with its spacer into the
remaining hole on the mounting bracket with the
bolt supplied. Torque this bolt to 28 ft-lbs (38Nm)
with a 15mm socket and torque wrench.
05/06
Page 25
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com