user manual

86. Here is the new drive belt idler pulley and
mounting hardware.
87. Install the new bolts through the bracket and
into the holes that original mounted the alternator.
Note the gap between the bracket and the block,
this is where the alternator will mount.
Idler Pulley
Mounts Here
85. Torque all manifold fasteners in two steps.
In the fi rst step torque the fasteners to 18 in-lbs
(2Nm). In the second step torque to 89 in-lbs
(10Nm) using the diagram shown.
88. Install the alternator and torque the two
mounting bolts to 28 ft-lbs (38Nm) with a 10mm
socket and torque wrench.
05/06
Page 24
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com