user manual

84. Install the original 10 intake manifold bolts

into place on the supercharger manifold and

the four water manifold bolts into their original

locations. Torque all manifold fasteners in two

steps with a 10mm socket and torque wrench

using the diagram shown in the next step.

83. Install the water manifold into place.

81. With the help of an assistant carefully set the

supercharger and manifold assembly in place.

Do not use the black plastic bypass canister as a

lifting point. This is pre-set from the factory and

can be damaged if you lift with it. Route the

manifold drain tube down behind

the engine on the passenger side.

82. From underneath the vehicle, attach the mani-

fold drain tube to the transmission ﬁ ll tube with the

tie-straps provided. It is recommended that at every

engine oil service the drain plug in the end of the hose

be removed, the hose allowed to drain and the plug

replaced.

Tie-Straps

05/06

Page 23

2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com