user manual

70. Install the throttle body gasket into the groove
in the inlet manifold fl ange.
71. Using the length of hose supplied, cut a 60”
length and connect one end to the passenger side
intercooler barb as shown. Secure the hose with
the #10 clamp supplied.
Gasket
69. Install the PCV vent tube assembly into the
hole in the inlet manifold. Use the original bolts
and tighten them to 89 in-lbs (10Nm) using a
torque wrench and 8mm socket.
Vent Tube
72. Clean and inspect the manifold gaskets
removed from the original intake manifold. Install
the gaskets onto the supercharger manifold, they
will “snap” into place.
60” Hose
05/06
Page 20
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com