user manual

25. Depress the tensioner arm by inserting
the square end of a 1/2” breaker bar into
the square hole on the arm. Press the
bar down to relieve tension on the belt
and remove the belt from the pulleys.
This belt will no longer be used.
26. Remove the Alternator bracket and the
(4) bolts that secure it in place using a
10mm socket wrench
27. Remove the (2) nuts that secure the
alternator using a 13mm wrench.
28. Lift the alternator up off its mounting
studs and carefully place it on the
passenger side fender well. Protect the
fender wall using a thick shop towel or
fender cover.
1/2” Breaker Bar
Remove Nuts
9/07
Page 9
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com