user manual

223. After loading the supercharged engine
program, turn the ignition key to the ON
position but do not start the vehicle.
Continue to fi ll the intercooler system
through the Filler bottle until the fl uid
level is 1” from the bottom of threaded
neck. When the system is full of coolant,
you should be able to see the coolant
swirl around in the bottle quite vigorously
with the ignition on. Replace the cap
after fi lling the system.
221. On the bottom edge of the driver side
instrument panel, locate the OBDII
service port.
222. Install the supercharged engine
programming using the enclosed SCT
program module. Important! Follow the
instructions enclosed with the Program
Module EXACTLY!
OBDII Service Port
220. Re-connect the negative (-) battery
clamp using a 7mm wrench.
9/07
Page 58
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com