user manual

208. Connect the remaining end of the 12”
hose to the barb passenger side (right)
of the heat exchanger with the spring
clamp supplied
209. Connect (1) end of the remaining length
of 3/4” hose to the barb on the driver
side (left) of the heat exchanger with the
spring clamp supplied.
Barb on Driver Side of
Heat Exchanger
Barb on Passenger Side
of Heat Exchanger
210. Route this hose across the front of the
vehicle and pass the radiator on the
right side. Leave this “loop” slack, as
it will lie into the front fascia when it is
re-installed. Pass the hose along the
right side of the engine with the other
intercooler hose and the re-routed
heater hose. Secure these hoses
together in (1) bundle with the black
plastic tie straps supplied.
211. Finally connect the remaining end of
3/4” hose to the upper or left barb of the
intercooler manifold with a spring clamp
supplied.
9/07
Page 55
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com