user manual

204. Connect the short end of the elbow hose
to the inlet barb of the intercooler pump.
Secure the hose with the spring clamp
supplied
207. From the length of 3/4” hose supplied,
cut a 12” length. Connect (1) end of the
12” length of hose to the lower barb on
the intercooler pump. Secure the hose
with the spring clamp supplied hose
supplied to the barb and secure it using
a #10 clamp supplied.
205. Connect the remaining leg of the elbow
hose to the front barb of the intercooler
fi ller bottle with the spring clamp
supplied
206. Route the heat exchanger vent hose up
to the small barb on the fi ller bottle and
connect it.
9/07
Page 54
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com