user manual

200. Pass the mount screw through the hole
in the mounting tab on the bottle and
then back into its hole in the oil neck-
mounting clamp. Tighten the mount
screw securely. (Shown removed from
the oil neck for clarity.) Install the cap
onto the fi ller bottle.
201. From the length of 3/4” hose supplied,
cut a 30” length. Connect (1) end of
the 32” length of hose to the lower
left intercooler barb on the rear of the
supercharger manifold. Secure the hose
with the spring clamp supplied hose
supplied to the barb and secure it using
a #10 clamp supplied.
202. Connect the remaining end of the 32”
length hose to the rear barb on the fi ller
bottle assembly. Secure the hose with
the spring clamp supplied hose supplied
to the barb and secure it using a #10
clamp supplied.
203. Using the “Elbow” hose supplied cut 2”
from the short end and 11” from the long
end.
9/07
Page 53
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com