user manual

197. Here is the heat exchanger installed.
Carefully re-attach the (2) pieces of
bumper padding by inserting the (4)
plastic fasteners into their original holes
in the bumper structure.
199. Remove the engine oil fi ller cap. Install
the oil neck-mounting bracket onto the
engine oil fi ller neck by loosening the
clamp screw to allow the bracket to
slide around the neck. Point the bracket
towards the passenger side fender
and tighten the clamp screw securely.
Remove the mount screw. Replace the
engine oil fi ller cap.
Clamp
Screw
Mount
Screw
198. Here is the intercooler fi ller bottle, cap,
oil neck mounting clamp and bottle
clamp.
196. Install the length of 1/8” hose onto the
small barb on the vent port fi tting. Route
the hose rearward towards the engine.
The remaining end of the hose will be
connected in a later step.
Oil Neck Mounting Clamp
Bottle
Cap
9/07
Page 52
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com