user manual

191. On the driver side power steering cooler
bracket location, replace the power
steering cooler mounting bolt with the
longer bolt and spacer supplied. Pass
the bolt through the power steering
mounting bracket, then the intercooler
heat exchanger bracket, next the tubular
spacer supplied and fi nally into the
original hole. Do not completely tighten
the bolts at this time, leave them fi nger
tight until all (4) fastener of the heat
exchanger are in place.
New
Bolt
Intercooler
Bracket
Spacer
P/S Cooler
Bracket
190. Starting on the passenger side location
where the power steering cooler bracket
mounted, replace the power steering
cooler mounting bolt with the longer
bolt and spacer supplied. Pass the bolt
through the power steering mounting
bracket, then the intercooler heat
exchanger bracket, next the tubular
spacer supplied and fi nally into the
original hole. Do not completely tighten
the bolt at this time, leave them fi nger
tight until all (4) fastener of the heat
exchanger are in place.
189. The intercooler heat exchanger will
mount in front the air conditioning
condenser and behind the power
steering cooler.
Remove These Bolts
188. Remove the power steering cooler
mounting bracket bolts using a 10mm
socket wrench. Allow the power steering
cooler to carefully hang out of the way
as you position the intercooler heat
exchanger.
9/07
Page 50
2005-2007 Ford Mustang Supercharger Installation Instructions
magnacharger.com